Seal Pressure Test Plug for 3/4 Inch bung

2079
Seal Pressure Test Plug for 3/4 Inch bung

Seal Pressure Test Plug for 3/4 Inch bung

2079
 
$681.30 Each
+
Add to wish list

Just insert test plug into 3/4 inch NPS bung opening and pull cam handle down. Replaceable soft neoprene seal is expanded against the bung threads, effectively seals up to 100 psi. Aluminum body with plated steel cam handle.

  • Bung Opening: 3/4 inch NPS
  • Inlet: 3/8 inch NPT
  • Aluminum body with plated steel cam handle

Drum Plug Connectors are used for testing large industrial drums and other shallow openings. Insert the connector straight into a pipe tapped opening. Push the seal flange face against the face of the opening, then actuate the cam handle 90° to the locked position, affecting a positive seal. The black seal should fit snuggly into the opening to the point where it cannot be pulled out. Adjust the tension of the seal by turning the handle clockwise. Do not  over tighten the sealing is created by the flange of the seal being drawn against the outer face of the opening. Maximum pressure for a standard pipe tapped opening is 100 PSI (6.8 BAR) and 50 psi. For a smooth bore.

 

Wt.:
1 lb