MORSE® Forklift Karrier ™- 1500 lb Capacity - Heavy Duty Model

285A-HD
MORSE® Forklift Karrier ™- 1500 lb Capacity - Heavy Duty Model

MORSE® Forklift Karrier ™- 1500 lb Capacity - Heavy Duty Model

285A-HD
 
$789.60 Each
+
Add to wish list

MORSE® Forklift Karrier for 55 gallon steel drums slide quickly and easily onto forks without tools - no modifications or connections to the lift truck are required. Fork openings are 25 inches apart, accepts forks up to 2 1/2 inch x 6 1/2 inch. To use this unit with rimmed fiber or plastic drums you will need to purchase the MORcinch™ rim clamp assembly (SKU 4560-P).

Heavy duty model has a 1500 lb. capacity or an 800 lb half drum capacity. A half full drum will be unbalanced and bottom heavy so when you tilt it, the load shifts differently than if it were a full drum. 

It provides finer tilt control with 60:1 ratio gear and sprocket drive. The 20 foot pull chain has 10 feet drop of chain that allows the operator to turn the drum from the driver seat of the fork truck.

The heavy duty Forklift Karrier features the MORcinch™ drum handling system that automatically adjust for 22 inch to 23 1/2 inch diameter drums with sliding idler and durable stress relief weld joints. It has a flexible cinch chain cover to enhance grip and help protect sidewall of your drum.

Lift, move and control pouring of heavy drums right from the seat of your forklift.

  • All operations controlled from the driver's seat
  • 1500 lb full drum capacity
  • 800 lb half drum capacity
  • Fits 55 gallon steel drums
  • Lifts and drains
  • Add a rim clamp assembly to handle rimmed or plastic drums

Options Available include: Drum Diameter Adapters for handling smaller drums. Bracket (SKU 4556-P) or Rim Clamp (SKU 4560-P) for handling plastic or fiber drums and MORStop™ Tilt-Brake that automatically stops and holds the tilt angle of the drum.

Note: Not every style and size option will work on every MORSE unit. A Hand Crank (SKU X02-285HD) or Hand Wheel (X03-285HD) is available to replace the manual tilt mechanism standard on this unit.

Spark Resistant Models are available through special order. Call our Customer Service Experts at 1.800.776.3786 for assistance with selecting options.

Made in the USA

Cap. Full Drum:
1500 lb
Cap. Half Drum:
800 lb
Fits Drum:
55 gallon steel
Gear Ratio:
60:1
Type:
Manual
Wt.:
162 lb
Length:
42"
Width:
34"
Height :
23"